butt joint
英 [bʌt dʒɔɪnt]
美 [bʌt dʒɔɪnt]
对接
英英释义
noun
- a joint made by fastening ends together without overlapping
双语例句
- Select a connecting mode, branching or butt joint, suggest using XKM insulation piercing connector;
选用一种连接方式，分支或对接，建议使用XKM绝缘穿刺线夹； - An interface formed by joining the ends of two optical fibers in a coaxial ( in-line) butt joint for direct fiber-to-fiber transmission.
为使光纤对光纤直接传输，将两根光纤的端面以同轴对接方式进行连接所形成的一种界面。 - Test shows that this way can exhibit good result to butt joint and lap joint of TIG welding and accurately abstract welding seam out, to the welding seam of large magnitude dogleg angle shows good tracking effect ( dogleg angle< 68 °) and procession speed< 100 ms.
实验表明，系统对TIG焊的对接和搭接焊缝有很好地处理效果，对大幅度折线焊缝也能很好的跟踪（折线角>68°），处理速度>100ms。 - Most scholars mainly adopted one dimension variation analysis model, and took qualitative analysis on the butt joint, lap joint of the parts in the research field of assembly sequence optimization which targets was dimension quality.
以装配尺寸质量为目标的装配顺序优化研究方面，多数学者主要采用一维的偏差分析模型，对零件间的对接、搭接等接头形式进行定性分析。 - Vision system of butt joint gap width measurement for laser welding
激光焊接对接接头间隙宽度视觉测量系统 - Owing to the terminals with the steps, the butt joint parts and the connecting parts are not on the same plane.
由于上述端子具有台阶使得对接部与连接部不在同一平面上。 - The utility model relates to a chimney butt joint sealing device for solving the problems of untight inserting, difficult processing, material wasting of the traditional chimney inserting.
一种烟筒对接用密封装置，解决传统的烟筒插接带来的插接不严，加工困难，浪费材料等问题。 - Creating a butt joint by welding.
通过焊接产生对接接头的焊接。 - Using the commercial CCD camera, the TIG weld pool surface image of butt joint is captured with high clearance and resolution by optimizing the optical parameters and adjusting the image-grabber parameters dynamically.
利用普通CCD摄像机，通过光学参数的优化和采集参数的动态调整，拍摄出了清晰度和分辨率都较高的对接TIG焊熔池正面图像。 - The weld and installation of the plugging triple valve is first step of the plugging procedure. There are two major steps: First, the welded butt joint between the upper and lower backplates.
三通封堵结构的焊接安装是封堵操作的第一步，其主要分为上下护板间的对接和上下护板与管材间的角焊接。